My First Look at rad1o Badge - Great Scott Gadgets

Great Scott Gadgets

My First Look at rad1o Badge


Over the next several days, thousands of hackers will gather at the Chaos Communication Camp in Germany. An electronic badge for the event is being prepared, and it is based on my design for HackRF One!

At DEF CON over the weekend, I was fortunate to be able to meet up with Ray, one of the members of the Munich CCC group responsible for the rad1o badge. Ray was wearing one of the prototype units, so I was able to take a close look.

rad1o prototype at DEF CON 23

The design is a variation of HackRF One. It includes a small LCD and an audio interface, so it is a bit like having a HackRF One plus a PortaPack H1 on a single board. A slim, rechargeable LiPo battery is mounted on the back. The visual design of the PCB looks like a traditional AM/FM radio receiver complete with an antenna (which is not the actual RF antenna) and a dial (which is not really a dial).

There are some design modifications, especially in the RF section, that seemed strange to me at first. The reason for many of these changes is that the rad1o team was able to get certain chip vendors to agree to sponsor the badge by donating parts. By redesigning around donated components they were able to reduce the cost to a small fraction of the cost of manufacturing HackRF One, making it possible to build the rad1o badge for several thousand campers.

The firmware for rad1o is derived from HackRF One firmware but is in a separate repository. Because of the LCD and other differences between the two hardware designs, they are not firmware-compatible. When using rad1o as a USB peripheral, it is fully supported by existing software that supports HackRF One. Future rad1o firmware will use a USB product ID of 0xCC15 assigned from the Openmoko pool, but the shipping firmware will borrow HackRF One's product ID. This will ensure that any existing software for HackRF One will work with rad1o during camp. The new product ID (0xCC15) is already supported in libhackrf release 2015.07.2, so it should be easy for people to update to it in the near future.

If you are new to Software Defined Radio and are looking forward to using the badge as a way to get started with SDR, I recommend starting with my video series. You might want to download the videos before leaving for camp. Also take a look at Getting Started with HackRF and GNU Radio and the recommended software for rad1o. If you plan to do firmware or hardware hacking, be sure to clone the rad1o repositories. For examples of Digital Signal Processing (DSP) on the LPC43xx, I suggest studying Jared Boone's firmware for PortaPack H1. Also check out the video of Jared's Software-Defined Radio Signal Processing with a $5 Microcontroller at BSidesLV 2015.

As an open source hardware developer, it is extremely satisfying to see folks start with my design and do something amazing like the rad1o badge. I'm excited to be attending camp for my first time ever, and I can't wait to see the projects people will come up with!